Measurement units and standards are different in different countries but to maintain a standard, SI units are mostly used when dealing with projects involving different countries or even different states. Small projects can be done with the locally used unit system but when the project is big, one standard unit system is to be used.
Two most common system used in the United States are
United States Customary System (USCS)
System International (SI)
But the SI unit system is more widely used all over the world. Following is the table which shows how you can convert USCS measurements in SI measurements. ( Just multiply the USCS amount with the corresponding figure given in table below
Convert USCS into SI Units
| USCS unit X Factor = SI unit | SI symbol |
| Square foot X 0.0929 = Square meter | M2 |
| Cubic foot X 0.2831 = Cubic meter | M3 |
| Pound per square inch X 6.894 = Kilopascal | KPa |
| Pound force X 4.448 = Newton | Nu |
| Foot pound torque X 1.356 = Newton meter | N-m |
| Kip foot X 1.355 = Kilonewton meter | LN-m |
| Gallon per minute X 0.06309 = Liter per second | L/s |
| Kip per square inch X 6.89 = Megapascal | MPa |
If you have a query, you can ask a question here.
information of all iron and steel
unit convention for strength of material in civil engg
Thanku very much for nice information given on this page. Most of the engineer will use this page. It is very help full.Thanks again.
Thank you for give me this information. I am diploma civil engineer.
Nice one