Is structure engineering troubling you?
Do you face problems in solving even the basic problems?
If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.
Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.
Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)
Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.
So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.
hello sir . i m doing my mtech in structural engineering.my theises topic is design of multistorey masonry building.
which software i can use for the analysis & design of load bearing masonry structure?staad, etab etc…
for a slab size of 32ft*52ft*5inch, how much steel is required.
Sir,
Plz show me example of rate analyses of Lane Marking and gate valve
I wanted to know, the exact proportion of materials used in Granular Sub-Base (GSB) of thickness 200mm , Wet Mix Macadam (WMM) of thickness 250mm, in 1 Cu.M Thnk u ..!!
can u share with me what is the important of nature conservation for civil engineer ?
sir plz i want a project report on highway construction and construction of MSE retaining wall
the weight of suspension cradle is 4.5 tonnes with a working load of 1.6 tonnes.
Dear Sir,
I am R.C.C. Consultant, I have Designed the Tank of 95m X 12m.x6.50 m/ Without Expansion Joint. But as per third party proof checking he commented that they required Expansion Joint or Calculations for Temp. Stresses. So pls. guide me to calculate the temp. stresses for this tank.
Thanks
Hello….
Can any one tell me
is any one know about spray plaster machine , which can mix mortar pump it and spray it , is any one using
this type of machine please tell me , Thanks
Please advise how we can define a tie beam and what is the purpose of tie beam
IS codes for sand blasting?
is dere any scope in RMC field for civil Engineers in India
do civil engineers have a greater beneficial influence on public health than the entire medical profession
we are meant to make an un-reinforced concrete cube of up to 100k/n strength at 28 days, but have no clue on how to work out the water cement ratio. any help?
Dear Sir,
Can you explain me how to calculate pipe length for LR 90° Elbow for 6″.
and also what should be ratio for expansion any pipe
How should i design a pile cap if moment has been introduced along with axial load ?
Please give me a case study of FORMWORK PLANNING FOR MULTYSTORY BUILDING
Please,what is the difference between one way and two reinforcement span
1. If the ratio between long span/ short span is 2 & below and the slab is supported on four sides then the slab is said to be two way slab & the slab is to be designed & reinforced [Main reinforcement is placed on both the ways] accordingly.
2. If the ratio between long span/ short span is above 2 and the slab is supported with minimum two sides, then the slab is said to be one way slab and the slab is to be designed & reinforced [Main reinforcement is placed across the supports/ short span] accordingly.
3. If the slab is supported on only one side then the slab is said to be Cantilever slab & is designed & reinforced accordingly.
Please let me know is it safe, structurally, to keep the windows only corners of the building [on exterior wall]
sir , plz tell me what is the difference between bunkers & silos ?
sir,in steel structures we have different types of steels like fe415,fe250,fe500,HYSD bars.In what type of steel structures we use these grades of steels,and HYSD bars.