Is structure engineering troubling you?
Do you face problems in solving even the basic problems?
If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.
Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.
Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)
Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.
So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.
hello, sir i’m student of civil engineering Third year, Please suggest me some projects can be done by me. It will be helpful for me sir
Thankyou
How to get/extract bitumen from the mixture of Benzene & bitumen whcih is available after knowing the bitumen content of bituminous mix
Dear Sir’s
Please clarify me on the following query.
Whether usage of FE500 steel grade will have an impact on the area of steel and quantity of steel over FE 415 in a structure and in what way.
Thanks
Guruprasad P
sir i want to know about concrete grade as m20 ,m35 and what cement ratio use in this grade m35
sir I face difficulties in solving of determinate and indeterminate beams in structure analysis. Is there any tip through which i can easily solve the problems in structure analysis???
sir, i want to do live project ,can u guide me some topics.
Sir, I am executing formation of road with both side cc drains. The width of road is 23M including drains on both sides. CC drains are o.6M vent on one side and 1.2M vent on other side with average height of 1.2M.Initially drains are constructed and roads are being formed as layers of road are forming, the CC drain walls are getting cracks, why it is and how to arrest them, kindly advise me.
sir i would like to ask about designing using software like E Tabs etc and where to get trained
sir i want to ask that why rounded aggregate are prefer in pcc and not angular
hello sir.i m final year BE student.i m doing project on basalt fibre concrete…so plz i need some guidance.how can i complete my project sir.i dont know about test and how to calculate requirement of basalt for this project…plz help me.sir.
can you help?the answers to these chainlink made from 10mm msoverall lenght 130mm inside width of 30mm what lenght 10mm round ms bar is required?, lenght of 25mmround ms req to bend fire weld a rig inside diam of 240mm?
the lenght of 50mm round ms required to bend and electric weld a ring inside diam of 325mm ? lenght of 100mmsquare ms needed to forge a 50mm diamx340mm long?
I have posted a couple of questions as i am learning blacksmithing can you help please? thank you Jesse
My question is why we use different solvents in different countries to test bitumen purity?
US – CS2
UK-Toluene
India-C2HCl3
what is technical checking in column lane beam and slap,and more then r.c.c,and steel,i want to know about this plz send me
i wish to manufacture, AAC concrete blocks, for that i wish to know the fly-ash, cement ,lime and water ratio.
Dear sir, what is the permissible limits for fine aggregates (washed sand) in BS.
I am a fresher and i need it so badly. Please tell me about the procedure of estimating the cost of any building project.
Can you please provide general COLUMN, PLINTH BEAM, LINTEL BEAM design details (Dimension, TMT steel bar size, no. of steel bar) for three story building.
sir mixed design for m45 interlocking pavers (dry mix)
I want to know that how much time the measurement books was preserved in a government department
Q.A man wishes to move a wooden box of 1m cube to a distance of 5m with the least amount of work. If the block weighs 1kN and the coeffient of friction is 0.3, determine whether he should tip the box or slide it.