By
Raj Mohammad Khan
Following table shows the M-20 Mix Designs as per IS-10262-2009, hope this helps all civil engineers here
|
M-20 CONCRETE MIX DESIGN |
||
|
As per IS 10262-2009 & MORT&H |
||
|
A-1 |
Stipulations for Proportioning | |
|
1 |
Grade Designation | M20 |
|
2 |
Type of Cement | OPC 53 grade confirming to IS-12269-1987 |
|
3 |
Maximum Nominal Aggregate Size | 20 mm |
|
4 |
Minimum Cement Content (MORT&H 1700-3 A) | 250 kg/m3 |
|
5 |
Maximum Water Cement Ratio (MORT&H 1700-3 A) | 0.5 |
|
6 |
Workability (MORT&H 1700-4) | 25 mm (Slump) |
|
7 |
Exposure Condition | Normal |
|
8 |
Degree of Supervision | Good |
|
9 |
Type of Aggregate | Crushed Angular Aggregate |
|
10 |
Maximum Cement Content (MORT&H Cl. 1703.2) | 540 kg/m3 |
|
11 |
Chemical Admixture Type | Superplasticiser Confirming to IS-9103 |
|
A-2 |
Test Data for Materials | |
|
1 |
Cement Used | Coromandal King OPC 53 grade |
|
2 |
Sp. Gravity of Cement | 3.15 |
|
3 |
Sp. Gravity of Water | 1.00 |
|
4 |
Chemical Admixture | Not Used |
|
5 |
Sp. Gravity of 20 mm Aggregate | 2.884 |
|
6 |
Sp. Gravity of 10 mm Aggregate | 2.878 |
|
7 |
Sp. Gravity of Sand | 2.605 |
|
8 |
Water Absorption of 20 mm Aggregate | 0.97% |
|
9 |
Water Absorption of 10 mm Aggregate | 0.83% |
|
10 |
Water Absorption of Sand | 1.23% |
|
11 |
Free (Surface) Moisture of 20 mm Aggregate | nil |
|
12 |
Free (Surface) Moisture of 10 mm Aggregate | nil |
|
13 |
Free (Surface) Moisture of Sand | nil |
|
14 |
Sieve Analysis of Individual Coarse Aggregates | Separate Analysis Done |
|
15 |
Sieve Analysis of Combined Coarse Aggregates | Separate Analysis Done |
|
15 |
Sp. Gravity of Combined Coarse Aggregates | 2.882 |
|
16 |
Sieve Analysis of Fine Aggregates | Separate Analysis Done |
|
A-3 |
Target Strength for Mix Proportioning | |
|
1 |
Target Mean Strength (MORT&H 1700-5) | 30N/mm2 |
|
2 |
Characteristic Strength @ 28 days | 20N/mm2 |
|
A-4 |
Selection of Water Cement Ratio | |
|
1 |
Maximum Water Cement Ratio (MORT&H 1700-3 A) | 0.5 |
|
2 |
Adopted Water Cement Ratio | 0.5 |
|
A-5 |
Selection of Water Content | |
|
1 |
Maximum Water content (10262-table-2) | 186 Lit. |
|
2 |
Estimated Water content for 25 mm Slump | 145 Lit. |
|
3 |
Superplasticiser used | nil |
|
A-6 |
Calculation of Cement Content | |
|
1 |
Water Cement Ratio | 0.5 |
|
2 |
Cement Content (145/0.5) | 290 kg/m3 |
|
|
Which is greater then 250 kg/m3 | |
|
A-7 |
Proportion of Volume of Coarse Aggregate & Fine Aggregate Content | |
|
1 |
Vol. of C.A. as per table 3 of IS 10262 | 62.00% |
|
2 |
Adopted Vol. of Coarse Aggregate | 65.00% |
|
|
Adopted Vol. of Fine Aggregate ( 1-0.65) | 35.00% |
|
A-8 |
Mix Calculations | |
|
1 |
Volume of Concrete in m3 | 1.00 |
|
2 |
Volume of Cement in m3 | 0.09 |
|
|
(Mass of Cement) / (Sp. Gravity of Cement)x1000 | |
|
3 |
Volume of Water in m3 | 0.145 |
|
|
(Mass of Water) / (Sp. Gravity of Water)x1000 | |
|
4 |
Volume of Admixture @ 0% in m3 | nil |
|
|
(Mass of Admixture)/(Sp. Gravity of Admixture)x1000 | |
|
5 |
Volume of All in Aggregate in m3 | 0.763 |
|
|
Sr. no. 1 – (Sr. no. 2+3+4) | |
|
6 |
Volume of Coarse Aggregate in m3 | 0.496 |
|
|
Sr. no. 5 x 0.65 | |
|
7 |
Volume of Fine Aggregate in m3 | 0.267 |
|
|
Sr. no. 5 x 0.35 | |
|
A-9 |
Mix Proportions for One Cum of Concrete (SSD Condition) | |
|
1 |
Mass of Cement in kg/m3 | 290 |
|
2 |
Mass of Water in kg/m3 | 145 |
|
3 |
Mass of Fine Aggregate in kg/m3 | 696 |
|
4 |
Mass of Coarse Aggregate in kg/m3 | 1429 |
|
|
Mass of 20 mm in kg/m3 | 1029 |
|
|
Mass of 10 mm in kg/m3 | 400 |
|
5 |
Mass of Admixture in kg/m3 | nil |
|
6 |
Water Cement Ratio | 0.5 |
Advertisements
We are thankful to Er. Raj M. Khan for sharing this information with us on engineeringcivil.com. We hope this would be of great significance to civil engineers.
If you have a query, you can ask a question here.
I want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
in addition to above I want to know the weight of Materials as per ISCODE
want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio by volume and by weight
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
i am civil engineer,i am reding the subjects related to construction on your site,if u have other related subjects information ,plz mail me
Sir,
I have completed my diploma in civil in 2010.i like to do my b.tech correspondence.is it right decision.plz reply me to my mail.
THANK YOU SIR….
want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio by volume and by weight
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
I want kwow that how many cement bags we multiply with different types of concrete like(M20,M15,etc.)to find out the exact quantity of cement bags?
Plz send the data to my mail ID.
Want ratios of 10mm aggregates to 20mm aggregates for different mixes of concrete like m10 m15 m20 m25
Dear Sir,
I am constructing 2 storey building at Kerala. The contractor given the ratio of RCC 1:2:4 for roof slabs (4″ thickness) using 20 mm metal. rebrhaving size 8 mm dia rods. Please confirm whether it ratio and rod size is suitable for two storey building.
renjith
Dear Sir ,
How do you calculate the estimated water content for 25mm slump as 145 Lit ?. Thanks in advance for the concern..
Sir, I want all mix design proportions by volume and weight.
I want to know the calculation for cube test strength for M20. M30…. and required strength.
I want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
Please send the details in my e-mail id
hello sir;
i’m anbu i want more enquiries abt MIX design of reinforce concrete….how can i download it?
I want to know information about cracks of plaster.
1m3 cement=how many kg
=450kg
with regards,
Arun Ganveer
I want quantity of cement , Aggregate, Sand and water for
Deffirent type of mix grade and ratio
M5
M7.5
M10
M15
M20
M25
M30
M35
M40
Please send the details in my e-mail id
ple tell the required quantity of cement forM5
M7.5
M10
M15
M20
M25
M30
M35
M40
sir,i am fresh civil engineer, now on field, i need the mean derivation, how to calculate the mix design and mix proportions, and i need the derivation for to calculate the mass of steel for per distance for different grades.. waiting to grow and gain knowledge.