Awarded as the best online publication by CIDC

Workability of Fresh Concrete by Compacting Factor Test

COMPACTING FACTOR

Compacting factor of fresh concrete is done to determine the workability of fresh concrete by compacting factor test as per IS: 1199 – 1959. The apparatus used is Compacting factor apparatus.

Procedure to determine workability of fresh concrete by compacting factor test.

i) The sample of concrete is placed in the upper hopper up to the brim.

ii) The trap-door is opened so that the concrete falls into the lower hopper.

iii) The trap-door of the lower hopper is opened and the concrete is allowed to fall into the cylinder.

iv) The excess concrete remaining above the top level of the cylinder is then cut off with the help of plane blades.

v) The concrete in the cylinder is weighed. This is known as weight of partially compacted concrete.

vi) The cylinder is filled with a fresh sample of concrete and vibrated to obtain full compaction. The concrete in the cylinder is weighed again. This weight is known as the weight of fully compacted concrete.

Advertisements

Compacting factor = (Weight of partially compacted concrete)/(Weight of fully compacted concrete)

compacting-factor-apparatus

Share this post

Kanwarjot Singh

Kanwarjot Singh is the founder of Civil Engineering Portal, a leading civil engineering website which has been awarded as the best online publication by CIDC. He did his BE civil from Thapar University, Patiala and has been working on this website with his team of Civil Engineers.

If you have a query, you can ask a question here.

100 comments on "Workability of Fresh Concrete by Compacting Factor Test"

aditya patil says:

thats reaaly good site
i did not found my answer in books even in s. chands books but got it her

bhupendra kumar swami says:

Best for us ,….civil engineers I like this CEP

prakash says:

really good site…….for practical method

ibrahim eyebee says:

really appreciates the internet

walude ashiraf says:

What does workability mean

Yamon says:

Workability of concrete is a property that determines the amount of internal work necessary to produce full compaction.It represents four important properties of concrete,namely mixability,transportability,mouldability and compactability.

soumya ranjan Sethy says:

Workability means the ease or difficulty with which the concrete is handled transported placed in between forms with minimum loss of homoginity

Bharat Chaudhary says:

A concrete is said to be workable if it is easily transported, placed, compacted and finished without any segregation

SARAH YEA says:

Why the internal side of the cube must be coated with lubricant?

akhil says:

so that cement doesn’t stick to the apparatus

Naved says:

Among these which test gives best workability (compaction test,slump test and vee bee test)

Haziqah Omar says:

Slump test

Naveen kumar says:

how is compaction related to workability of concrete?

Ashish Kumar Ravi says:

What is compacting factor test

Joginder Singh says:

How much compacted factor should be for good workability of concrete?

Asyikin says:

how does the big value of compacting factor affecting the concrete strength

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question